Testimonials
“On behalf of the Directors and Managers of the Dielectric Etch Division, we would like to thank NexLogic and their staff for the OUTSTANDING job they did in completing order #XXXX before schedule. We are particularly grateful because we recognize the many demands that we place upon your time as well as company.
NexLogic understood the urgency of this issue and took on the challenge. Not only did NexLogic meet the urgent requirements of this program, but exceeded our own expectations by delivering the full order before schedule. WOW!”
Al S.
Applied Materials, Inc.
“The professionalism you and your staff demonstrated during the start up phase of building 5 new boards from scratch amplifies the exceptional talents available at NexLogic. This level of professionalism runs deep and I say this from my dealings that begin at the marketing and customer support staff through the manufacturing engineering and purchasing people. Everyone was courteous, professional and knowledgeable and was always very responsive to our needs. There was a need to re-manufacture some boards that were done at another assembly house and your staff literally turned those around in just days to help us keep on schedule.
I have no problem referring colleagues from within and outside of the Woods Hole Oceanographic Institution to your organization, I’m confident they will have the same experience in their dealings with you as I have had.”
Ken J.
Woods Hole Oceanographic Institute
“I wanted to thank you again for the timely delivery of my last parts, “Power Luxeon”. I was able to beat my deadline by three days because of your hard work.”
Sal C.
Lumileds Lighting, LLC
“The first couple of jobs that I contracted since with NexLogic were flawlessly executed:
- Request for quotes were delivered on-time and priced fair and competitively.
- NexLogic staff is prepared and available to start with PCB design engineering on short notice (a few days).
- The 2 PCB layout engineers who released my jobs were well-trained professionals
- NexLogic provides complete turn-key solutions and released for me finished assembled boards, taking care of fabrication, part procurement and assembly.
- For that reason, it is a convenient “one-stop shop” for putting systems together.
- To my surprise and unlike several other PCB houses, NexLogic achieved a 100% score for “on-time delivery”, meeting each of my deadlines.
- Finally, their overall Quality results are very high, providing a very good QA control and 100% of working boards, yield that I never yet obtained with the previous suppliers in my 10-year career.
In brief, I do recommend NexLogic Technology services that were completely satisfactory to me and enabled high-end PCB solutions at Infineon in 2001.”
Oliver G.
Infineon Technologies
“Working with you guys was a truly remarkable experience. From the moment of discussing the quote and up to the final state where the boards were delivered after testing. Everything along the path was done very professionally and, in fact, the feeling I had was closer to working with an internal department.
Although one engineer – Syed – was the one assigned for this project, all the rest of them seem to care a lot about the success of it and contributed whenever they could each one of them in its own expertise.
The board was a challenge and required deep and profound view as well as long hours of work. Syed was very open to my suggestions and contributed a lot out of his own experience. The result: a board well designed with no problems fully functioning at very high speed.
And finally, the assembly group. Everything was verified and rechecked, no effort was spared in the process. The delivery was ahead of schedule and all Ultra Fine Line BGA’s were soldered perfectly.”
Walter A.
Infineon Technologies
“I have been using your services for the last 5 years and I have been very pleased. I’ve found your staff to be exceptionally knowledgeable. Your courteous and knowledgeable staff, the flexible and fast high quality service and competitive pricing has made NexLogic my primary choice for all my PCB needs. Due to the excellent service that I have received, I have recommended NexLogic to many of my coworkers for their PCB design needs.”
Chris K.
“The responsiveness, quality, and on time (early) deliveries have helped our company reduce cycle times and because of this, increase our share of the advanced probe card market.
On behalf of Microprobe, Inc., please pass along special thanks to Chris XXXX for his attention to detail, additional efforts on weekends, and responsiveness. We are sure there are others who also deserve recognition so please pass along our thanks and congratulations.”
Steve M.
MicroProbe
“Please allow me to take the opportunity to acknowledge the exemplary service that we at the Stanford University Optical Communications Research Laboratory have received from NexLogic Technologies. Your company has provided us with both PCB fabrication and assembly services for approximately ten designs, which range in complexity from the simplest of designs to complex circuit boards operating at 2.5 Gbps. We have never been unsatisfied with the end product delivered to us from NexLogic. We expect to continue to use NexLogic as our primary vendor for printed circuit boards for years to come.”
Ian W.
Stanford University R & D
“Our virtual vehicle simulator and powertrain I/O interface programs have been a large success due mainly to the fast and reliable services rendered by NexLogic Technologies. GM appreciates the quality, workmanship and prompt delivery of services from your entire hard working staff of engineers and technicians. Without the timely delivery, quality and reliability of your services, the vehicle simulator and powertrain I/O interface programs would not become a reality.
Friendly service, prompt delivery and high quality were the hallmarks we at GM R&D were looking for when seeking a professional relationship with a board house. All of these qualities were more than satisfied. We look forward to a long hard working relationship that can benefit both our companies in the future.”
Alan B.
General Motors Corporation (R & D)
“I would like to thank your team for their hard work in Laying out, Fab, Procuring, Assembling and Testing my High Voltage PCB assembly. I appreciate their dedication, attention to detail, and working weekends to meet my aggressive time lines. I have recommended you to my co-workers who have also found working with your team a pleasure.”
Brad M.
Applied Materials, Inc.
“II just want to let you know how very satisfied we at Quake Technologies have been with your services. These services include PCB layout and PCB assembly and rework. We appreciate the professionalism shown by the employees at your company, but we especially appreciate the prompt delivery and early delivery of products and services you provide. We look forward to continuing to work with you in the near future.”
Joe L.
Quake Technologies, Inc.
“I would like to thank you for the work done by NexLogic in the Fabrication, Assembly and Testing of the printed circuit cards and assemblies. The availability of quick turnaround times has been instrumental in keeping us on schedule. Consistently, the workmanship has been of the highest quality, which has allowed the troubleshooting of the boards to concentrate on the design, rather than assembly issues. The responsiveness of your staff and the communication between them and us has resulted in the creation of many prototype boards in a very short period of time, and the avoidance of mistakes which could have been quite costly to the program. You have a very reliable team which Wescam has depended on throughout the project, and they came through for us in every instance. We look forward to a continued partnership with NexLogic during the production phase of the program, as well as future prototype projects.”
Ken L.
Wescam